Effect of Oxide on Surface Tension of Molten Metal

Oxides as one of the commonly activating fluxes used in active tungsten inert gas welding (A-TIG welding) can dramatically increase the penetration depth to 2–4 times that of conventional welding. Using the oscillation principle of inviscid fluid, a robust method is developed to measure the average surface tension of molten metal during A-TIG welding for four different oxide activating fluxes of B2O3, TiO2, SiO2, and MgO. The experimental results suggest that the oxygen released from the decomposition of oxides is the dominant factor contributing to the change of the surface tension, which can result in the change of the temperature coefficient from negative to positive and alter the Marangoni convection, leading to the increase in the penetration depth. However, oxygen of small amount or large amount has a negligible effect on the sign change of the temperature coefficient. For oxides of low melting points, the interaction between the electrons outside the arc and the neutral particles (atoms and molecules) formed from the dissolution of the oxides causes the constriction of the arc; for oxides of high melting points, the decrease of the spot area in the anode due to high resistivity of the oxides leads to the constriction of the arc

Preformed Pt nanoparticles supported on nanoshaped CeO2 for total propane oxidation

Pt-based catalysts have been widely used for the removal of short-chain volatile organic compounds (VOCs), such as propane. In this study, we synthesized Pt nanoparticles with a size of ca. 2.4 nm and loaded them on various fine-shaped CeO2 with different facets to investigate the effect of CeO2 morphology on the complete oxidation of propane. The Pt/CeO2-o catalyst with {111} facets exhibited superior catalytic activity compared to the Pt/CeO2-r catalyst with {110} and {100} facets. Specifically, the turnover frequency (TOF) value of Pt/CeO2-o was 1.8 times higher than that of Pt/CeO2-r. Moreover, Pt/CeO2-o showed outstanding long-term stability during 50 h. X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that the excellent performance of Pt/CeO2-o is due to the prevalence of metallic Pt species, which promotes C–C bond cleavage and facilitates the rapid removal of surface formate species. In contrast, a stronger metal–support interaction in Pt/CeO2-r leads to easier oxidation of Pt species and the accumulation of intermediates, which is detrimental to the catalytic activity. Our work provides insight into the oxidation of propane on different nanoshaped Pt/CeO2 catalysts.Peer ReviewedPostprint (published version

Effect of Gradually Decreasing Photoperiod on Immune Function in Siberian Hamsters

Animals usually use photoperiod as an important environmental cue to time the year. In terms of the winter immunocompetence enhancement hypothesis, animals in the non-tropical zone would actively enhance their immune function to decrease the negative influence of stressors such as low temperature and food shortage in winter. In the present study, we mimicked the transition from summer to winter by decreasing photoperiod gradually and examined the variations of immune repsonses in Siberian hamsters (Phodopus sungorus)  to test this hypothesis. Twenty two female adult hamsters were randomly divided into the control (12h light: 12h dark, Control, n=11) and the gradually decreasing photoperiod group (Experiment, n=11). In the experiment group, day length was decreased from 12 h: 12 h light-dark cycle to 8 h: 16 h light-dark cycle at the pace of half an hour per week. We found that gradually decreasing photoperiod had no effect on body composition (wet carcass mass, subcutaneous, retroperitoneal, mesenteric and total body fat mass) and the masses of the organs detected such as brain, heart, liver and so on in hamsters. Similarly, immunological parameters including immune organs (thymus and spleen), white blood cells and serum bacteria killing capacity indicative of innate immunity were also not influenced by gradually decreasing photoperiod, which did not support the winter immunocompetence enhancement hypothesis. However, gradually decreasing photoperiod increased phytohaemagglutinin response post-24h of PHA challenge, which supported this hypothesis. There was no correlation between cellular, innate immunity and body fat mass, suggesting that body fat was not the reasons of the changes of cellular immunity. In summary, distinct components of immune system respond to gradually decreasing photoperiod differently in Siberian hamsters

A wafer-scale two-dimensional platinum monosulfide ultrathin film via metal sulfurization for high performance photoelectronics

2D nonlayered materials have attracted enormous research interests due to their novel physical and chemical properties with confined dimensions. Platinum monosulfide as one of the most common platinum-group minerals has been less studied due to either the low purity in the natural product or the extremely high-pressure conditions for synthesis. Recently, platinum monosulfide (PtS) 2D membranes have emerged as rising-star materials for fundamental Raman and X-ray photoelectron spectral analysis as well as device exploration. However, a large-area homogeneous synthesis route has not yet been proposed and released. In this communication, we report a facile metal sulfurization strategy for the synthesis of a 4-inch wafer-scale PtS film. Enhanced characterization tools have been employed for thorough analysis of the crystal structure, chemical environment, vibrational modes, and atomic configuration. Furthermore, through theoretical calculations the phase diagram of the Pt–S compound has been plotted for showing the successful formation of PtS in our synthesis conditions. Eventually, a high-quality PtS film has been reflected in device demonstration by a photodetector. Our approach may shed light on the mass production of PtS films with precise control of their thickness and homogeneity as well as van der Waals heterostructures and related electronic devices

Applications of nanogenerators for biomedical engineering and healthcare systems

The dream of human beings for long living has stimulated the rapid development of biomedical and healthcare equipment. However, conventional biomedical and healthcare devices have shortcomings such as short service life, large equipment size, and high potential safety hazards. Indeed, the power supply for conventional implantable device remains predominantly batteries. The emerging nanogenerators, which harvest micro/nanomechanical energy and thermal energy from human beings and convert into electrical energy, provide an ideal solution for self‐powering of biomedical devices. The combination of nanogenerators and biomedicine has been accelerating the development of self‐powered biomedical equipment. This article first introduces the operating principle of nanogenerators and then reviews the progress of nanogenerators in biomedical applications, including power supply, smart sensing, and effective treatment. Besides, the microbial disinfection and biodegradation performances of nanogenerators have been updated. Next, the protection devices have been discussed such as face mask with air filtering function together with real‐time monitoring of human health from the respiration and heat emission. Besides, the nanogenerator devices have been categorized by the types of mechanical energy from human beings, such as the body movement, tissue and organ activities, energy from chemical reactions, and gravitational potential energy. Eventually, the challenges and future opportunities in the applications of nanogenerators are delivered in the conclusive remarks. The combination of nanogenerator and biomedicine have been accelerating the development of self‐powered biomedical devices, which show a bright future in biomedicine and healthcare such as smart sensing, and therapy